Randell 52365WPRM-CFA Manual do Operador descarregar pdf (Página 10)

10 800-621-8560

NOTE: It is important that a voltage reading be made at the compressor

motor electrical connections, while the unit is in operation to verify the

correct voltage required by the compressor is being supplied. Low or high

voltage can detrimentally affect operation and thereby void its warranty.

Unit Operation

UNIT INFORMATION

Mechanical Compartment

1. The breading station is supplied with a main power switch.

The switch is located on the rear of electrical box behind

the upper hinged vented door. The main power switch will

completely shut down the upper rail as well as the lower

refrigerated base when in off position.

2. The rail power switch is located on the front of the electrical

box. The rail power switch will shut down the rail for nightly

shut down and cleaning. The lower refrigerated base will

continue to cool when the rail power switch is off.

3. Two digital temperature controls are located on the front of

the electrical box. The upper control regulates temperature

for the rail and the lower control regulates temperature for

the refrigerated base. (See Unit Operation page 11).

4. The condenser filter indicator light is located on the front of

the electrical box. If illuminated the condenser filter must be

cleaned or replaced. (See Preventative Maintenance page

12).

5. The condenser filter is located behind the lower hinged

vented door. (See Preventative Maintenance page 12).

6. The drain valve for the upper rail is found behind the upper

hinged vented door. The rail may be drained by placing a

pan under the drain valve and opening the valve. (See

Evening Shut Down of Prep Rail).

Upper Rail Lid and Lift Mechanism

1. The lid can be positioned three ways

• Fully closed

• Opened

• Fully opened

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 22 23

Sem comentários

Randell 52365WPRM-CFA Manual do Operador Página 10